|CNC wood cutting router (C2-9)|
|Model||C2-9 CNC router|
|Working Table Dimension||1220x2440mm|
|X Y Z Working Area||3150*1780*250mm|
|Top And Bottom Stroke Of Spindle||150mm|
|Max Moving Speed||X axis :60m/min Y axis:60m/min|
|Spindle Type||Manual cutter spindle|
|Main Shaft Speed||3000 – 18000 RPM|
|Vacuum Area||four vacuum areas|
|High-Frequency Spindle Horsepower||2X6KW|
|Vacuum Pumping Horsepower||10HP(7.5KW)-250m 3 /h|
|CNC Controller||Taiwan new generation system|
|Standard Configuration||Toolbox, equipment operation manual|
|Drill Shaft System||9V Italy FAM|
|Vertical Drill Shaft Number||9|
|Drill Shaft Horsepower||1.5kw|
|Rotation Speed of Drill Shaft||3200 rpm|
|Pitch of Drills||32 mm (1.26″)|
|Drill Shaft Stroke||70 mm (2.76″)|
|Software||E- wood software|
The machine bed is made of 150*300, 150*200 rectangular tubes,s and a 10 mm steel plate.
- High rigidity and high strength.
- The 20mm steel plate is milled to 10mm
High-quality shaft drive adopts
X&Y shaft drive adopts Japan SHIMPO reducer, Germany Henry high-precision oblique gear, with high-speed displacement positioning accuracy, reduce noise, rapid displacement up to 60m / min, smooth and accurate displacement, the maximum machining displacement speed can reach 30m / min.
European certification CE electric
Large screen display interface
No intermittent tool change
One-button tool change
Production management system
- The slab list the automatic processing function
- The system will automatically record the work process. simple and fast
- Public side, accelerate through
- Preheating machine
- No need to return to the origin
- It does not need to return to the original point for a one-button start, direct processing, which can ensure accuracy, save processing time, improve work efficiency, and the device can work after booting.
- Power-off breakpoint continuous carving function
- Vacuuming. There is no dead angle in the dust collecting port, all the wood chips are sucked away.